Uses of Interface org.joda.time.ReadableInstant

Uses in package org.joda.time

Classes implementing org.joda.time.ReadableInstant
class	DateMidnight DateMidnight defines a date where the time component is fixed at midnight.
class	DateTime DateTime is the standard implementation of an unmodifiable datetime class.
class	Instant Instant is the standard implementation of a fully immutable instant in time.
class	MutableDateTime MutableDateTime is the standard implementation of a modifiable datetime class.

Constructors with parameter type org.joda.time.ReadableInstant
Duration.Duration(ReadableInstant start, ReadableInstant end) Creates a duration from the given interval endpoints.
Interval.Interval(ReadableDuration duration, ReadableInstant end) Constructs an interval from a millisecond duration and an end instant.
Interval.Interval(ReadableInstant start, ReadableDuration duration) Constructs an interval from a start instant and a duration.
Interval.Interval(ReadableInstant start, ReadableInstant end) Constructs an interval from a start and end instant.
Interval.Interval(ReadableInstant start, ReadablePeriod period) Constructs an interval from a start instant and a time period.
Interval.Interval(ReadablePeriod period, ReadableInstant end) Constructs an interval from a time period and an end instant.
MutableInterval.MutableInterval(ReadableDuration duration, ReadableInstant end) Constructs an interval from a millisecond duration and an end instant.
MutableInterval.MutableInterval(ReadableInstant start, ReadableDuration duration) Constructs an interval from a start instant and a duration.
MutableInterval.MutableInterval(ReadableInstant start, ReadableInstant end) Constructs an interval from a start and end instant.
MutableInterval.MutableInterval(ReadableInstant start, ReadablePeriod period) Constructs an interval from a start instant and a time period.
MutableInterval.MutableInterval(ReadablePeriod period, ReadableInstant end) Constructs an interval from a time period and an end instant.
MutablePeriod.MutablePeriod(ReadableDuration duration, ReadableInstant endInstant) Creates a period from the given duration and end point.
MutablePeriod.MutablePeriod(ReadableDuration duration, ReadableInstant endInstant, PeriodType type) Creates a period from the given duration and end point.
MutablePeriod.MutablePeriod(ReadableInstant startInstant, ReadableDuration duration) Creates a period from the given start point and the duration.
MutablePeriod.MutablePeriod(ReadableInstant startInstant, ReadableDuration duration, PeriodType type) Creates a period from the given start point and the duration.
MutablePeriod.MutablePeriod(ReadableInstant startInstant, ReadableInstant endInstant) Creates a period from the given interval endpoints using the standard set of fields.
MutablePeriod.MutablePeriod(ReadableInstant startInstant, ReadableInstant endInstant, PeriodType type) Creates a period from the given interval endpoints.
Period.Period(ReadableDuration duration, ReadableInstant endInstant) Creates a period from the given duration and end point.
Period.Period(ReadableDuration duration, ReadableInstant endInstant, PeriodType type) Creates a period from the given duration and end point.
Period.Period(ReadableInstant startInstant, ReadableDuration duration) Creates a period from the given start point and the duration.
Period.Period(ReadableInstant startInstant, ReadableDuration duration, PeriodType type) Creates a period from the given start point and the duration.
Period.Period(ReadableInstant startInstant, ReadableInstant endInstant) Creates a period from the given interval endpoints using the standard set of fields.
Period.Period(ReadableInstant startInstant, ReadableInstant endInstant, PeriodType type) Creates a period from the given interval endpoints.

Methods with parameter type org.joda.time.ReadableInstant
boolean	ReadableInterval.contains(ReadableInstant instant) Does this time interval contain the specified instant.
Days	Days.daysBetween(ReadableInstant start, ReadableInstant end) Creates a `Days` representing the number of whole days between the two specified datetimes.
Chronology	DateTimeUtils.getInstantChronology(ReadableInstant instant) Gets the chronology from the specified instant object handling null.
long	DateTimeUtils.getInstantMillis(ReadableInstant instant) Gets the millisecond instant from the specified instant object handling null.
Chronology	DateTimeUtils.getIntervalChronology(ReadableInstant start, ReadableInstant end) Gets the chronology from the specified instant based interval handling null.
int	DateTimeZone.getOffset(ReadableInstant instant) Gets the millisecond offset to add to UTC to get local time.
Hours	Hours.hoursBetween(ReadableInstant start, ReadableInstant end) Creates a `Hours` representing the number of whole hours between the two specified datetimes.
boolean	ReadableInstant.isAfter(ReadableInstant instant) Is this instant after the instant passed in comparing solely by millisecond.
boolean	ReadableInterval.isAfter(ReadableInstant instant) Is this time interval after the specified instant.
boolean	ReadableInstant.isBefore(ReadableInstant instant) Is this instant before the instant passed in comparing solely by millisecond.
boolean	ReadableInterval.isBefore(ReadableInstant instant) Is this time interval before the specified instant.
boolean	ReadableInstant.isEqual(ReadableInstant instant) Is this instant equal to the instant passed in comparing solely by millisecond.
boolean	Partial.isMatch(ReadableInstant instant) Does this partial match the specified instant.
Minutes	Minutes.minutesBetween(ReadableInstant start, ReadableInstant end) Creates a `Minutes` representing the number of whole minutes between the two specified datetimes.
Months	Months.monthsBetween(ReadableInstant start, ReadableInstant end) Creates a `Months` representing the number of whole months between the two specified datetimes.
Seconds	Seconds.secondsBetween(ReadableInstant start, ReadableInstant end) Creates a `Seconds` representing the number of whole seconds between the two specified datetimes.
void	MutableDateTime.setDate(ReadableInstant instant) Set the date from another instant.
void	MutableInterval.setEnd(ReadableInstant end) Sets the end of this time interval as an Instant.
void	ReadWritableInterval.setEnd(ReadableInstant instant) Sets the end of this time interval as an Instant.
void	MutableInterval.setInterval(ReadableInstant start, ReadableInstant end) Sets this interval from two instants, replacing the chronology with that from the start instant.
void	ReadWritableInterval.setInterval(ReadableInstant startInstant, ReadableInstant endInstant) Sets this interval from two instants.
void	MutableDateTime.setMillis(ReadableInstant instant) Sets the millisecond instant of this instant from another.
void	ReadWritableInstant.setMillis(ReadableInstant instant) Sets the millisecond instant of this instant from another.
void	MutablePeriod.setPeriod(ReadableInstant start, ReadableInstant end) Sets all the fields in one go from two instants representing an interval.
void	MutableInterval.setStart(ReadableInstant start) Sets the start of this time interval as an Instant.
void	ReadWritableInterval.setStart(ReadableInstant instant) Sets the start of this time interval as an Instant.
void	MutableDateTime.setTime(ReadableInstant instant) Set the time from another instant.
DateTime	ReadablePartial.toDateTime(ReadableInstant baseInstant) Converts this partial to a full datetime by resolving it against another datetime.
Weeks	Weeks.weeksBetween(ReadableInstant start, ReadableInstant end) Creates a `Weeks` representing the number of whole weeks between the two specified datetimes.
Interval	Interval.withEnd(ReadableInstant end) Creates a new interval with the specified end instant.
Interval	Interval.withStart(ReadableInstant start) Creates a new interval with the specified start instant.
Years	Years.yearsBetween(ReadableInstant start, ReadableInstant end) Creates a `Years` representing the number of whole years between the two specified datetimes.

Uses in package org.joda.time.chrono

Methods with parameter type org.joda.time.ReadableInstant
GJChronology	GJChronology.getInstance(DateTimeZone zone, ReadableInstant gregorianCutover) Factory method returns instances of the GJ cutover chronology.
GJChronology	GJChronology.getInstance(DateTimeZone zone, ReadableInstant gregorianCutover, int minDaysInFirstWeek) Factory method returns instances of the GJ cutover chronology.

Uses in package org.joda.time.field

Methods with parameter type org.joda.time.ReadableInstant
int	AbstractPartialFieldProperty.compareTo(ReadableInstant instant) Compare this field to the same field on another instant.
int	AbstractReadableInstantFieldProperty.compareTo(ReadableInstant instant) Compare this field to the same field on another instant.
int	AbstractReadableInstantFieldProperty.getDifference(ReadableInstant instant) Returns the difference between this field property instant and the one passed in, in the units of this field.
long	AbstractReadableInstantFieldProperty.getDifferenceAsLong(ReadableInstant instant) Returns the difference between this field property instant and the one passed in, in the units of this field.

Uses in package org.joda.time.format

Methods with parameter type org.joda.time.ReadableInstant
String	DateTimeFormatter.print(ReadableInstant instant) Prints a ReadableInstant to a String.
void	DateTimeFormatter.printTo(StringBuffer buf, ReadableInstant instant) Prints a ReadableInstant, using the chronology supplied by the instant.
void	DateTimeFormatter.printTo(Writer out, ReadableInstant instant) Prints a ReadableInstant, using the chronology supplied by the instant.

Uses in package org.joda.time.base

Classes implementing org.joda.time.ReadableInstant
class	AbstractDateTime AbstractDateTime provides the common behaviour for datetime classes.
class	AbstractInstant AbstractInstant provides the common behaviour for instant classes.
class	BaseDateTime BaseDateTime is an abstract implementation of ReadableDateTime that stores data in `long` and `Chronology` fields.

Constructors with parameter type org.joda.time.ReadableInstant
BaseDuration.BaseDuration(ReadableInstant start, ReadableInstant end) Creates a duration from the given interval endpoints.
BaseInterval.BaseInterval(ReadableDuration duration, ReadableInstant end) Constructs an interval from a millisecond duration and an end instant.
BaseInterval.BaseInterval(ReadableInstant start, ReadableDuration duration) Constructs an interval from a start instant and a duration.
BaseInterval.BaseInterval(ReadableInstant start, ReadableInstant end) Constructs an interval from a start and end instant.
BaseInterval.BaseInterval(ReadableInstant start, ReadablePeriod period) Constructs an interval from a start instant and a time period.
BaseInterval.BaseInterval(ReadablePeriod period, ReadableInstant end) Constructs an interval from a time period and an end instant.
BasePeriod.BasePeriod(ReadableDuration duration, ReadableInstant endInstant, PeriodType type) Creates a period from the given duration and end point.
BasePeriod.BasePeriod(ReadableInstant startInstant, ReadableDuration duration, PeriodType type) Creates a period from the given start point and duration.
BasePeriod.BasePeriod(ReadableInstant startInstant, ReadableInstant endInstant, PeriodType type) Creates a period from the given interval endpoints.

Methods with parameter type org.joda.time.ReadableInstant
int	BaseSingleFieldPeriod.between(ReadableInstant start, ReadableInstant end, DurationFieldType field) Calculates the number of whole units between the two specified datetimes.
boolean	AbstractInterval.contains(ReadableInstant instant) Does this time interval contain the specified instant.
boolean	AbstractInstant.isAfter(ReadableInstant instant) Is this instant after the instant passed in comparing solely by millisecond.
boolean	AbstractInterval.isAfter(ReadableInstant instant) Is this time interval after the specified instant.
boolean	AbstractInstant.isBefore(ReadableInstant instant) Is this instant before the instant passed in comparing solely by millisecond.
boolean	AbstractInterval.isBefore(ReadableInstant instant) Is this time interval before the specified instant.
boolean	AbstractInstant.isEqual(ReadableInstant instant) Is this instant equal to the instant passed in comparing solely by millisecond.
DateTime	AbstractPartial.toDateTime(ReadableInstant baseInstant) Resolves this partial against another complete instant to create a new full instant.
Duration	BasePeriod.toDurationFrom(ReadableInstant startInstant) Gets the total millisecond duration of this period relative to a start instant.
Duration	BasePeriod.toDurationTo(ReadableInstant endInstant) Gets the total millisecond duration of this period relative to an end instant.
Interval	BaseDuration.toIntervalFrom(ReadableInstant startInstant) Converts this duration to an Interval starting at the specified instant.
Interval	BaseDuration.toIntervalTo(ReadableInstant endInstant) Converts this duration to an Interval ending at the specified instant.
Period	BaseDuration.toPeriodFrom(ReadableInstant startInstant) Converts this duration to a Period instance by adding the duration to a start instant to obtain an interval using the standard period type.
Period	BaseDuration.toPeriodFrom(ReadableInstant startInstant, PeriodType type) Converts this duration to a Period instance by adding the duration to a start instant to obtain an interval.
Period	BaseDuration.toPeriodTo(ReadableInstant endInstant) Converts this duration to a Period instance by subtracting the duration from an end instant to obtain an interval using the standard period type.
Period	BaseDuration.toPeriodTo(ReadableInstant endInstant, PeriodType type) Converts this duration to a Period instance by subtracting the duration from an end instant to obtain an interval using the standard period type.

Overview Package Class Use Tree Index Deprecated About
	Frames \| No Frames

Uses of Interface org.joda.time.ReadableInstant

Uses in package org.joda.time

Classes implementing org.joda.time.ReadableInstant

Constructors with parameter type org.joda.time.ReadableInstant

Methods with parameter type org.joda.time.ReadableInstant

Uses in package org.joda.time.chrono

Methods with parameter type org.joda.time.ReadableInstant

Uses in package org.joda.time.field

Methods with parameter type org.joda.time.ReadableInstant

Uses in package org.joda.time.format

Methods with parameter type org.joda.time.ReadableInstant

Uses in package org.joda.time.base

Classes implementing org.joda.time.ReadableInstant

Constructors with parameter type org.joda.time.ReadableInstant

Methods with parameter type org.joda.time.ReadableInstant